KEYLESL
Key Label
40 OUTPUT 718;"@;"
50 OUTPUT 718;"KEYDEF
l,D-LP,%SHOW
CAL%;"
60 OUTPUT 718;"KEYEXC
1;"
70 OUTPUT
718;"KEYLBL
l,%NEW
NAME%;"
80
END
Description
The
“@”
signifies the end of the function
declaration.
Soflkey
1
is
now called “‘SHOW CAL” and
performs the function
D-L2
Executes
sojtkey
1.
Soflkey 1
is
now labeled
“NEW
NAME”,
but performs the same function.
When specifying the softkey number, you should only use a number from 1 through 6, or 601
through 1200. Using other than the recommended softkey numbers can cause undesirable
results.
The softkey number corresponds to the menu number as follows:
softkey number = (menu number
-
1) x 6 + softkey position
(The softkey position range is 1 through 6.)
For example:
Menu 1 contains softkey numbers 1 through 6
Menu 101 contains
softkey
numbers 601 to 606
Menu 200 contains
softkey
numbers 1195 to 1200
Menu 1 can be accessed by pressing
(MEAS/USEji),
User hanus . Menus 101 through 200, as well
as menu 1, can be accessed using the MENU command. See “MENU” for more information on
accessing
softkeys
and menus.
5-262
Programming Commands