Filter
Top Products
ENTER Enter From HP-IB
ENTER
Enter From HP-IB
Allows the spectrum analyzer to receive data from other devices on the HP-IB.
Syntax
ENTER
-
HP-IB address
format
/
\
f
predefined variable
/
user-defined
variable/
Item
Number
User-defined variable
Predefined variable
A command that acts as a variable. Refer to Table 5-l.
Predefined function
Function that returns a value. Refer to Table 5-l.
Trace element
An element of trace A, trace B, trace C, or a user-defined trace.
Description/Default
Any valid integer number.
A variable defined by VARDEF or ACTDEF commands.
R-fle
oto
30.
Any valid variable
name.
Prerequisite Commands: ACTDEF or VARDEF when using a user-defined variable.
Related Commands: FUNCDEF, OUTPUT, RELHPIB.
Required Options: Option 041.
Example
Note
The plotter is at address 5 and the spectrum analyzer is at address 18. (The
program is only valid for HP 9000 Series 200 and 300 computers.)
The example uses the spectrum analyzer to send the ASCII code for OP; (output parameter)
to the plotter. The ENTER command is used to receive the coordinates from the plotter.
Program lines 110 to 140 display the coordinates on the spectrum analyzer screen.
Softkey
1 is programmed to display the plotter coordinates.
Softkey
1 can be accessed by pressing
(MEAS/USERj,
User Menus .
Programming Commands
5-149