Agilent Technologies 8590 TV Converter Box User Manual


 
SEGDEL, 5-483
segment delete, 5-483
segment entry for frequency limit lines,
5-485
segment entry for sweep time limit lines,
5-488
select frequency or time limit line, 5-274
selecting a trace window for FFT, 5-578
selecting polarity
TVSYNC, 5-577
selecting the type of video frame, 5-573
selecting triggering for the TV standard
formats, 5-575
SENTER, 5-485
SENTERT, 5-488
SER, 5-491
serial number, 5-491
service request mask, 5-473
set date, 5-492
SETDATE,
5-492
SET DATE
softkey.
See
SETDATE
set time, 5-493
SETTIME,
5-493
SET TIME
softkey.
See
SETTIME
setting the baud rate, C-7
setting the marker counter resolution, 5-339
setting the real-time clock, 5-551
setting the spectrum analyzer trigger mode,
5-554
setting the threshold level, 5-550
setting the time and date, 5-551
setting the trace operations to preset values,
5-569
setting the TV line number, 5-572
setting the video bandwidth
VB, 5-587
setting the video bandwidth ratio, 5-589
SGL SWP key. See SNGLS
SIGNAL TRACK
MKTRACK, 5-363
SINGLE FFT
softkey.
See FFTSNGLS
SINGLE
MEAS
softkey.
See ACPSNGLM
single sweep, 5-496
single sweep measurement, 5-46
single-sweep mode, 2-2, 2-3
SMOOTH, 5-494
smooth trace, 5-494
SNGLS, 2-2, 2-3, 5-496
softkey
underlining and inverse video, 5-255
softkeys
clearing with KEYDEF, 5-246
source attenuator, 5-506
source leveling control, 5-504
source normalization, 5-508
source power, 5-515
source power-level step size, 5-511
source power offset, 5-510
source power sweep, 5-513
source tracking, 5-5 17
source tracking peak, 5-519
SP, 2-4, 2-5, 5-497
span, 2-4, 2-5, 5-497
marker to span, 5-357
SPAN
softkey.
See SP
span zoom, 5-500
SPAN ZOOM
softkey.
See SPZOOM
SPEAKER, 5-499
special numbers and characters, 5-2
specifying the frequency of the marker
MKF, 5-336
spectrum analyzer error
messages,
A-l
spectrum analyzer state, 3-9
SPZOOM, 5-500
SQLCH, 5-501
SQR, 5-502
square root, 5-502
squelch, 5-501
SQUELCH
softkey.
See SQLCH
SRCALC, 5-504
SRCAT, 5-506
SRC ATN MAN AUTO
softkey.
See SRCAT
SRCNORM, 5-508
SRCPOFS, 5-510
SRCPSTP, 5-511
SRCPSWP, 5-513
SRCPWR, 5-515
SRC PWR OFFSET
softkey.
See SRCPOFS
SRC PWR ON OFF
softkey.
See SRCPWR
SRC PWR STP SIZE
softkey.
See SRCPSTP
SRCTK, 5-517
SRCTKPK, 5-519
SRQ, 5-520
SS, 5-524
ST, 5-526
standard baud rates, 5-76
standard deviation of trace amplitudes, 5-529
START FREQ
softkey.
See FA
start frequency, 5-156
STATE
--$
INTRNL
softkey.
See SAVES
status bits
clearing,
5-
103
status byte definition, 5-522
status byte query, 5-528
status of a trace
TRSTAT, 5-570
STB, 5-528
STDEV, 5-529
step size
decreasing by the step size with DN, 5-137
Index-13