Filter
Top Products
‘able
5-4. Functional Index (continued)
Function
Category
RECALL
or SAVE
Command
PSTATE
PURGE
RCLS
RCLT
SAVES
SAVET
SAVRCLF
SAVRCLN
SAVRCLW
STOR’
Corresponding
Description
Key Function
SAV LOCK ON
OFF
Protects all of the spectrum analyzer’s
user state and trace registers from
bein]
changed.
DELETE
FILE
Deletes the
specified
file from the
current mass storage device.
INTERUAL
->
STATE
Recalls spectrum analyzer state data
from one of the nine state registers in
spectrum analyzer memory.
The
softkeys
accessed by
Recalls previously saved trace data,
Tnternal
->
Trace
amplitude factors, or limit-line data
from the trace registers in spectrum
analyzer memory.
STATE
->
INTRUL
Saves the currently displayed
instrument state ln spectrum analyzer
memory.
The
softkeys
accessed by
Saves the selected trace data and state
Trace
->
Intrnl
information, amplitude correction
factors, or limit-line tables in spectrum
analyzer memory.
~or~RECALL]
Specifies
either a save or recall
operation.
Specifies the number to append to the
prefix for a save or recall operation,
am
initiates the transfer of data.
Specilles the data to be transferred.
STATE
->
CARD
*,
Stores data on a RAM card.
Trace
->
Card*,
ALL DLP
->
CARD
*
lPAN
FS
HNt
HNLOCKt
FULL SPAN
Sets the frequency span of the
spectrun
analyzer to full span.
Returns the harmonic number of the
current harmonic band in which the
spectrum analyzer is tuning.
Band selection accessed by
Forces the spectrum analyzer to use
Band Luck t or
only the selected harmonic band.
BKD
LOCK OR
UFFt
HNUNLKt
LSPAN
PKZMOK
BND LOCK
OR
OFF
(OFF is
Unlocks the harmonic band.
underlined)+
LAST SPAN
Changes the spectrum analyzer’s span
tc
the previous span setting.
Returns a
“0”
if the peak zoom routine
(PKZOOM) found only the spectrum
analyzer’s local oscillator feedthrough,
otherwise a “1” is returned.
PKZOOM
PEAK
Z#DA
Automatically tunes the spectrum
analyzer to the signal with the highest
amplitude level while narrowing the
frequency span to the specified
frequency span.
Option 003 required for HP 8590L or HP 8592L.
For HP
8592L,
HP 85933, HP 85953, or HP 85963 only.
Programming Commands
5-23