Filter
Top Products
SENTERT Segment Entry for Sweep Time Limit Lines
Item Description/Default
Range
Uumber
Any real or integer number. For amplitude, the The range for the
default unit is
dBm.
For sweep time, the default
amplitude varies
unit is seconds.
with ROFFSET.
The range for the
sweep time is the
sweep time range
of the spectrum
analyzer.
User-defined variable A variable defined by VARDEF or ACTDEF Any valid
commands.
variable name.
?redefined
variable
A command that acts as a variable. Refer to
‘Ikble
5-1.
Trace element
An element of trace A, trace B, trace C, or a
user-defined trace.
Related Commands: LIMIMODE, LIMIREL, LIMISEGT, SEGDEL, SENTER.
Example 1
This example enters limit-line values into the upper and lower limit-line tables.
OUTPUT
718;"RL
-1ODB;"
OUTPUT
718~"LIMIDEL*"
OUTPUT
~~~I~~LIMIFT
+IME;"
Sets the reference level to -10 dB
Erases any the current limit line table.
Sets the limit lines to be based on
sweep time.
OUTPUT
718;"LIMIMODE
UPLOW;LIMIREL ON;"
Specifies
the upper and lower limit-
line table as
rektive.
OUTPUT
718;"SENTERT
lOMS,-lODB,-50DB,FLAT;"
Enters in values for a segment.
OUTPUT 718;"SENTERT
OMS,-15DB,-GODB,FLAT;"
Enters in values for a segment.
OUTPUT
718;"LIMITEST
0N;TS;"
Turns on the limit-line testing.
Example 2
OUTPUT
718;"LIMIFT
TIME;"
Sets the limit lines to be based on sweep
time.
OUTPUT
718;"LIMIMODE
DELTA;LIMIREL
OFF;"
Spec@..es
the mid and delta table format
and
jkzd
type.
OUTPUT 718;"SENTERT
lOMS,-20DB,lODB,FLAT;"
Enters in values for a segment.
OUTPUT
718;"SENTERT
OMS,-30DB,20DB,FLAT;"
Enters in values for a segment.
OUTPUT
718;"LIMITEST
0N;TS"
Turns on the limit-line testing.
Description
Each limit-line segment is specified with a starting sweep time, an upper or median amplitude
value, a lower or delta amplitude value, and a segment type. The segment type defines how the
line segment is to extend from its starting point to the next segment.
Programming Commands 5488