Filter
Top Products
BIT
Bit
Places the state (“1” or “0”) of a bit in the destination.
Syntax
7
destination
7
,,
predeflned
variable
buser-defined
variable)
L
trace element
/
I-
source
--\
number
/
b
predefined variable
1
user-defined
variable/
$
predefined function
I
b
trace
element
/
7
bit number
7
/
%
predefined variable
I
buser-defined
variable)
%
predefined function
I
b
trace
element
J
Item
User-defined variable
Predeiined variable
Predeflned function
Trace element
Number (source)
Number (bit number)
Description/Default Range
A variable defined by VARDEF or ACTDEF commands.
Any valid variable
name.
A command that acts as a variable. Refer to Table 5-l.
Function that returns a value. Refer to Table 5-l.
An element of trace A, trace B, trace C, or a
user-defined
trace.
Any valid integer number.
64-bit integer.
Any valid integer number.
0 to 63.
Prerequisite Commands: ACTDEF or VARDEF when using a user-defined variable.
Related Commands: INT, STB.
Example
10 CLEAR 718
20 OUTPUT
718;"IP;"
30 OUTPUT
718;"VARDEF
E-RROR,O;"
40 OUTPUT
718;"BIT
E-RROR,STB,S;"
50 OUTPUT
718;"E_RROR?;"
60 ENTER
718;Err
70
IF NOT Err THEN DISP
"NO
'I;
80 DISP "ERROR PRESENT";
90 END
5-78
Programming Commands
Clears HP-IB bus.
Initializes spectrum analyzer
Defines
user-&fined variable
EA?ROR
and sets it
equal to 0.
Stores value of bit 5 of status byte
in
E-RROR.
Returns value of
E-RROR.
Assigns value to computer variable,
Err
If Err
equals
zero, displays
“NO’*
on computer
screen.
Displays
‘<ERROR
PRESENT” on computer screen.