Filter
Top Products
INVALID KEYLBL:
_
-
-
Indicates that the specified key label contains too many characters. A key label is limited to
8 printable characters per label line. (U)
INVALID KEYNAME:-
-
-
The specified key name is not allowed. (The key name may have conflicted with a spectrum
analyzer programming command.)
lb
avoid this problem, use an underscore as the second
character in the key name, or avoid beginning the key name with the following pairs of
letters: LB, OA, OL, TA, TB, TR, MA, MF, TS, OT, and DR. (U)
INVALID OUTPUT FORMAT
The output format is not valid. See the appropriate programming command description to
determine the correct format. (U)
INVALID RANGE: Stop < Start
Indicates that the first trace element specified for a range of trace elements is larger that
ending trace element. When specifying a trace range the starting element must be less than
the ending element. For example,
TRA[2,300]
is legal but
TRA[300,2]
is not. (U)
INVALID REGISTER NUMBER
The specified trace register number is invalid. (U)
INVALID REPEAT MEM OVFL
Memory overflow occurred due to a REPEAT routine. This can occur if there is not enough
spectrum analyzer memory for the REPEAT UNTIL declaration, or if the REPEAT UNTIL
declaration exceeds 2047 characters. (U)
INVALID REPEAT NEST LEVEL
The nesting level in the REPEAT routine is improperly constructed. This can occur if too
many REPEAT routines are nested. When used within a downloadable program (DLP), the
maximum number of REPEAT UNTIL statements that can be nested is 20. (U)
INVALID RS-232
ADRWOPERATION
An RS-232 operation was aborted due to an invalid operation. (U)
INVALID SAVE REG
Data has not been saved in the specified state or trace register, or the data is corrupt. (U)
INVALID SCRMOVE
Indicates the spectrum analyzer may have a hardware failure. See the spectrum analyzer’s
Service Guide for more information. (H)
INVALID START INDEX
Indicates that the first trace element specified for a range of trace elements is not within the
trace range of the specified trace. (U)
INVALID STOP INDEX
Indicates that the ending trace element specified for a range of trace elements is not within
the trace range of the specified trace. (U)
INVALID STORE
DEST:
-
-
-
The specified destination field is invalid. (U)
INVALID TRACE:
_
_
_
The specified trace is invalid. (U)
INVALID TRACE NAME:
_
_
_
The specified trace name is not allowed. Use an underscore as the second character in the
trace name, or avoid beginning the trace name with the following pairs of letters: LB, OA,
OL, TA, TB, TR, MA, MF, TS, OT, and DR. (U)
A-6 Spectrum Analyzer Error Messages