Filter
Top Products
IP Instrument Preset
Sets the gate delay to 1
ps.
(Option 105 only.)
Sets the gate delay to 1
,us.
(Option 105 only.)
Sets the gate length to 1
ps.
(Option 105 only.)
Uncouples the resolution bandwidth and the pulse width. (Option 105
only.)
Uncouples the sweep time and the pulse repetition interval. (Option
105 only.)
Uncouples the video bandwidth and the gate length. (Option 105
only.)
Sets the gate length to 1 ms. (Option 105 only.)
Sets the gate trigger polarity to trigger on the positive edge. (Option
105 only.)
Turns on the graticule.
Hold (deactivates active function).
Unlocks harmonic band, allowing multiband sweeping. (HP
8592L,
HP 85933, HP 85953, or HP 85963 only.)
Turns on the graticule.
Loaded from a configurable location in spectrum analyzer memory.
Selects 10
dB
per division log scale.
Sets LIMIDISP to AUTO.
Clears any limit-line trace specified by LIMIHI or LIMILO.
Turns off limit-line testing.
8-bit
Sets measurement to signal analysis.
Displays the marker amplitude values as relative to the reference
level.
Marker counter resolution is set to AUTO, but a calculated value other
than 0 may be returned if the marker counter resolution is queried. (
HP 85913, HP 85933, HP 85943, HP 85953, HP 85963, or Option 013
with HP 8590L only.)
Turns off noise markers.
Turns off marker pause mode.
Minimum excursion for peak identification is set to 6
dB.
Sets marker readouts to frequency.
Turns off the marker table.
Turns off marker tracking.
Sets the marker type as position type.
Sets mixer level to -10
Sets the operating mode to 0.
GD
GDRVGDEL
GDRVGLEN
GDRVRBW
GDRVST
GDRVVBW
GL
GP
GRAT
HD
HNLOCK OFF
GRAT
INZ
LG
LIMIDISP
LIMIHI or LIMILO
LIMITEST
MDS
MEASURE
MKDLMODE
MKFCR
MKNOISE
MKOFF
MKPAUSE
MKPX
MKREAD
MKTBL
MKTRACK
MKTYPE
ML
MODE
Programming Commands
5,243