Filter
Top Products
SAVRCLW
Save or Recall Data
Specifies the data to be transferred: trace A, trace B, trace C, program, amplitude correction
factors, limit line, or state.
Syntax
SAVRCLW
XSAVRCLW
Related Commands: MSI, PREFX, RCLS, RCLT, SAVES, SAVET, SAVRCLF, SAVRCLN.
Example
This example allows the current spectrum analyzer state to be saved on a RAM card.
OUTPUT 718;"SAVRCLF SAVE;"
SpecQies
a save operation.
OUTPUT
718;"SAVRCLW
STATE;"
Spec(jies
the source as the current spectrum analyzer state.
OUTPUT
718;"MSI
CARD;"
SpecQies
the card as the mass storage
okwice,
OUTPUT
718;"PREFX
%FRED%;"
Spec@.es
the
pre@
to store the state data
under:
OUTPUT.
718;"SAVRCLN
34;"
Appends the register number 34 to the
prefix
and initiates
the data
transfm
The RAM card now has a file called
sFRED-34
that contains the instrument state.
Description
SAVRCLW is used to save or recall data in spectrum analyzer memory or on a RAM card. See
“SAVRCLN” for the sequence of commands to initiate a data transfer.
The SAVRCLW parameters correspond to the type
of
data transferred as shown in the following
table.
Parameter
Type of Data Transferred
TRA
Trace A.
TRB
Trace B.
TRC Trace C.
DLP
Downloadable programs.
STATE
Instrument state.
LIMILINE
Limit lines.
. AMPCOR
, AmDlitude correction factors
5-482 Programming Commands