Filter
Top Products
limits failed, 5-272
mirror limit line, 5-280
relative limit lines, 5-283
limits failed, 5-272
linear scale, 5-295
line-feed, 3-9
line feed
label function, 5-266
line fill, 5-293
line number
TVLINE, 5-572
LINE
softkey.
See TM
line trigger mode, 5-554
LINFILL, 5-293
LMT DISP Y N AUTO
softkey.
See LIMIDISP
LN, 5-295
LOAD, 5-296
LOAD FILE
softkey.
See LOAD
loading a file from the memory card, 5-296
loading
DLPs
from a memory card into
analyzer memory, 4-11
LOG, 5-298
logarithm, 5-298
logarithmic scale, 5-268
log to linear conversion, 5-153
lower limit line, 5-279
lsb length, 5-3
LSB length, 3-24
LSPAN, 5-301
M
Ml, 5-10
M2, 5-10
M3, 5-10
M4, 5-378
MA, 5-10
making the DLP more readable, 4-20
MAN TRK ADJUST
softkey.
See SRCTK
MARKER ALL OFF
softkey.
See MKOFF
Marker Amplitude, 5-325
MARKER AMPTD
softkey.
See MKTYPE
marker as the active function, 5-328
marker bandwidth, 5-329
marker continue, 5-331
marker counter, 5-338
marker counter resolution, 5-339
marker delta, 5-332
marker delta display line mode, 5-334
marker frequency, 5-336
marker frequency output, 5-317
marker minimum, 5-341
marker noise, 5-344
marker normal, 5-342
MARKER NORMAL
softkey.
See MKN
MARKER <number> ON OFF
softkey.
See
MKACTV
marker off, 5-346
marker pause, 5-349
marker peak, 5-351
marker peak excursion, 5-352
marker position, 5-347
marker readout, 5-354
marker readout in frequency, 5-354
MARKER
-,
AUTO FFT
softkey.
See FFTAUTO
MARKER
-+
CF
softkey.
See MKCF
MARKER
+
CF STEP
softkey.
See MKSS
MARKER
+
FFl’
STOP
softkey.
See
FFTMS
MARKER
---)
MID SCRN
softkey.
See FFTMM
MARKER
+
REF LVL
softkey.
See MKRL
marker step size, 5-358
marker stop, 5-359
marker table, 5-360
marker table commands
marker delta display line mode
(MKDLMODE), 5-334
marker table (MKTBL), 5-360
marker to auto
FFl’,
5-164
marker to center frequency, 5-330
marker to reference level, 5-356
marker to span, 5-357
marker trace, 5-362
marker track, 5-363
marker type,, 5-364
amplitude, 5-364
delta, 5-364
fixed, 5-364
position, 5-364
MARKER A
softkey.
See MKD
marker zoom, 5-378
mass storage is, 5-374
MAX HOLD A, MAX HOLD B
softkey.
See
MXMH
maximum, 5-375
maximum hold, 5-377
MAX MXR LEVEL
softkey.
See ML
MC, 5-10
MDS, 3-22, 5-302
MDS command
MKF programming example, 5-337
MDU, 5-304
MEAN, 5-306
MEANTH, 5-307
MEASOFF, 5-309
MEAS
OFF
softkey.
See MEASOFF
MEASURE, 5-310
measurement data size, 3-22, 5-302
measurement data units, 5-304
measurement off, 5-309
measurement units, 3-26, 5-122
Index-8