Filter
Top Products
BAUDRATE
Baud Rate of Spectrum Analyzer
Specifies the baud rate of a spectrum analyzer with Option 043 (the RS-232 and parallel
interface) installed in it.
Syntax
baud rate
XBAUDRATE
Item
Description/Default
Number
Any valid integer number.
Range
4
to 57600.
Equivalent Softkey: BAUD
ISATE
.
Option Required: Option 043.
Example
The following example allows you to use a softkey to change the baud rate of the spectrum
analyzer to 2400 baud. The softkey (key number 1) can be accessed by pressing
C-1,
user
Menus .
PRINT
#l,“KEYDEF
l,%BAUDRATE
24OO;%,$BAUDRATE12400$;”
Description
The
BAUDRATE
command changes the baud rate of the spectrum analyzer to one of the
standard baud rates. The standard baud rates are as follows: 300, 1200, 2400, 4800, 9600,
14400, 19200, 38400, and 57600. If you specify a baud rate other than one of the standard
baud rates, the nearest standard baud rate will be used.
To
communicate with the computer, the baud rates of the spectrum analyzer and the computer
must be the same. Because changing the baud rate of the spectrum analyzer within a
program ends communication with the computer, you should only use
BAUDRATE
within a
downloadable program or when using the external keyboard to enter programming commands.
To reestablish communication with the computer, you must set the baud rate back to the baud
rate of the computer.
5.76
Programming Commands