Filter
Top Products
ZMKPKNL Zone Marker for Next Left Peak
ZMKPKNL
Zone Marker for Next Left Peak
Places the zone marker at the next signal peak that is left of the zone marker’s current
position.
Syntax
XZMKPKNL
Equivalent Softkey (HP 85913, HP 85933, HP 85943, HP 85953, or HP 85963 only):
ZONE PK LEFT,
Related Commands: MKPX,
WINON,
ZMKCNTR, ZMKSPAN, ZMKPKNR.
Example
OUTPUT
718;"WINON;"
Turns on the windows display
mode.
OUTPUT
718;"ZMKPKNL;"
PZuces
the
zone
mm&r
at the next peak to the
left
of the
cum-ent
position of the zone
marker:
Description
ZMKPKNL does the following:
1. Searches for the next signal peak outside and to the left of the zone marker. ZMKPKNL only
applies if
the
window is in a non-zero span; ZMKPKNL does not apply if the window is in
the time domain.
2. If a peak is found, ZMKPKNL moves the zone marker so that it is centered around the peak.
If a signal peak cannot be found, or the window is in zero span, the zone marker is not
moved.
3. Changes the center frequency of the lower window to the frequency of the signal peak.
‘Ib be considered a signal peak, the signal must be greater than the peak excursion (see
“MKPX” for more information about the peak excursion).
ZMKPKNL should only be used when the windows display mode is turned on.
Programming Commands
5-601