Filter
Top Products
Installing a new G700 with an S8300 using the Avaya Installation Wizard
166 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
The IW identifies the Media Gateway serial number and all media modules present. When
configuring a new gateway, click on the Action Icon. This opens four additional screens, which
allows you or the EPW to configure the following:
● Media Gateway Processor- identifies the Media Gateway Processor (MGP) to the network
● Add IP Route - configures additional IP routes on the network
● Media Gateway Controller List - configures the MGC list and sets LSP transition points. On
this screen, a PING test to each of the controllers in the MGC list can be conducted.
● VoIP Modules - configures all VoIP engines on the gateway
After returning to the IP Addresses screen, a green-circled checkmark signifies that the Media
Gateway has been configured. Click Continue. The Firmware screen displays.
Firmware screen
To check the firmware versions, click the Action Icon. The Firmware - Media Gateway <serial
number> screen displays.