Avaya G700 Home Theater Server User Manual


 
Installing a new G700 with an S8300 using the Avaya Installation Wizard
176 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
IP Network Region Screen
2. If necessary, complete the fields as described in Administration for Network Connectivity for
Avaya Communication Manager, 555-233-504.
Note:
Note: It is strongly recommended to use the defaults in the screen. However, for the
RTCP Enabled and RSVP Enabled fields, the entry should be n (no).
3. Press F3 (Enter) to submit the screen.
Associating LSPs with Network Regions
If the primary controller has LSPs, you can associate each LSP with one or more network
regions. In the event of a network failure, IP telephones assigned to a network region will
register with an LSP associated with that region.
This procedure associates up to six LSPs with a network region.
To associate LSPs with a network region
1. On the IP Network Region screen, go to page 2.
change ip-network-region 1 Page 1 of 19
IP NETWORK REGION
Region: 1
Location: Authoritative Domain:
Name:
MEDIA PARAMETERS Intra-region IP-IP Direct Audio: yes
Codec Set: 1 Inter-region IP-IP Direct Audio: yes
UDP Port Min: 2048 IP Audio Hairpinning? y
UDP Port Max: 3048
DiffServ/TOS PARAMETERS RTCP Reporting Enabled? n
Call Control PHB Value: 34 RTCP MONITOR SERVER PARAMETERS
Audio PHB Value: 46 Use Default Server Parameters? y
Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
Video 802.1p Priority: 5 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5