Avaya G700 Home Theater Server User Manual


 
Installing a new G700 with an S8300 using the Avaya Installation Wizard
186 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
3. Close the screen.
Enable Ethernet
Port?
The Ethernet port must be enabled (y) before it can be
used. The port must be disabled (n) before changes can
be made to its attributes on this screen.
Network Region The region number for this IP interface.
VLAN The VLAN number assigned to the C-LAN, if any.
Target socket
load
The threshold for the number of sockets used by this
C-LAN within the same Gatekeeper Priority as that of
other IP interfaces. If the targeted number is exceeded
on a CLAN, a warning alarm is generated. If the targeted
percentage is exceeded on an PE interface, a procr error
is generated.
Receive Buffer
TCP Window
Size
The threshold for the number of sockets used by this
C-LAN that triggers a warning message to be sent to the
error log.
Link This display only field shows the unique number for the
Ethernet link. The Ethernet link was assigned on the data
module form.
Allow H.323
Endpoints
Enter a ’y’ to allow H.323 endpoint connectivity on this
CLAN. Enter ’n’ if you do not want H.323 endpoints to
connect to this CLAN.
Allow H.248
Gateways?
Enter ’y’ to allow H.248 gateway connectivity to this
CLAN. Enter ’n’ if you do not want H.248 gateways to
connect to this CLAN.
Gatekeeper
Priority
This value is used on the alternate gatekeeper list. The
lower the number the higher the priority. Valid values for
this field are one through nine with five being the default.
This field displays only if the allow H.323 endpoints field
is set to a yes on this form.
Auto? Enter ’y’ or ’n’ to set auto-negotiation.
Speed Enter 10 or 100 Mbps if Auto was set to no.
Duplex Enter half or full if Auto was set to no.
Table 9: IP interfaces field descriptions (continued)
Field Conditions/Comments
2 of 2