Filter
Top Products
Manual installation of a new G700 with an S8300
508 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
To determine if new firmware for the P330 stack processor is necessary
1. At either the P330-1(super)# or P330-1(configure)# prompt, type dir.
The system displays the directory list of software for the P330 stack processor.
Directory list for P300 stack processor
2. Check the version number (ver num) of the EW_Archive file to see if it matches the Release
Letter.
If not, you must upgrade the P330 stack processor.
3. Type show image version
The system displays the list of software.
Show image version List for P330 stack processor
4. Check the version number of the stack software image file in Band B to see if it matches the
your planning document.
If not, you must upgrade the P330 stack processor.
To determine if new firmware is required for the MGP, VoIP module, and installed
media modules
1. Type session mgp
2. At the MG-001-1(super)# prompt, type show mg list_config
The system displays the list of software.
M# file ver num file type file location file description
-- ---- ------- ---------- ------------- ----------------
1 module-config N/A Running Conf Ram Module
Configuration
1 stack-config N/A Running Conf Ram Stack Configuration
1 EW_Archive 4.0.4 SW Web Image NV-Ram WEB Download
1 Booter_Image 3.2.5 SW BootImage NV-Ram Booter Image
Mod Module-Type Bank Version
------ ----------- ---- -------
3 Avaya G700 media gateway A 0.0.0
3 Avaya G700 media gateway B 4.0.17