Filter
Top Products
Manual installation of a new G700 with an S8300
542 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
● Host name
Enter the DNS name or IP address of the FTP or SCP server to which the backup data is
sent. To enter an IP address, use the dotted decimal notation (for example, 192.11.13.6).
● Directory
Enter the directory on the corporate repository to which you want to copy the backup file.
When you enter a forward slash (/) in the directory field, the system copies the backup
file to the default directory. The default directory for backup data on the FTP or SCP
server is /var/home/ftp. If you do not want to use the default directory, you must enter the
path name for the directory.
6. Click Start Backup.
The system displays the results of your backup procedure on the Backup Now results
screen.
This completes the installation of the G700 Media Gateway with an S8300 Media Server as
primary controller.
If using IA770, administer Communication Manager for
Integrated Messaging
A number of administration tasks must be performed to allow IA770 Integrated Messaging to
work. These tasks are explained in detail in
Administering the S8300 and S8400 Media Servers to
work with IA 770
, 07-600788.
!
CAUTION:
CAUTION: IA770 INTUITY AUDIX Messaging processes messages using the G.711 codec
only. Therefore, ensure that a codec set exists that uses only the G.711 codec.
Then, assign that codec set to a network region. And, finally, assign that network
region to the AUDIX signaling group that is linked to the IA770 INTUITY AUDIX
Messaging trunk group.
If IA 770 fails to start after a new installation
If you have installed or upgraded IA 770 INTUITY AUDIX and it does not start, you must ensure
that an IP address has been provided for use with IA 770. To check for the IP address, you must
use the Configure Server option through the Maintenance Web pages.
On the Configure Interfaces screen, ensure that a valid IP address is present in the Integrated
Messaging section.