Filter
Top Products
Terminal server installation
Issue 9.1 June 2006 405
5. Type iolan, the default password, and press ENTER.
The Administration Menu changes, offering more options.
6. Select server and press ENTER to view the Server Configuration menu.
7. Fill in the following fields with information appropriate to your network.
Leave the default settings for the other fields.
● Name:
● IP address: (for IOLAN+)
● Subnet mask:
8. Press ENTER and select Save & Exit to effect the changes.
You must reboot the server any time you change an IP address or Local Port value.
** Administrator ** SERVER CONFIGURATION Terminal: 2
Name [iolan ] Debug mode [0 ]
IP address [123.45.67.89 ]
Subnet mask [222.222.0.0 ]
Ethernet address [00:80:d4:03:11:cd] Ethernet interface [AUTO]
Language [English ]
Identification [ ]
Lock [Disabled]
Password limit [5 ]
CR to initiate [No ]
SNAP encoding [Disabled]
Boot host [ ] Boot diagnostics [Enabled ]
Boot file [ ]
Init file [ ]
MOTD file [ ]
Domain name [ ]
Name server [ ] NS Port [53 ]
WINS server [ ]
___________________________________________________________________________
Name used for prompts and message on bottom right of screen.
IOLAN PLUS v4.02.00 a CDi iolan