Filter
Top Products
About connection and login methods
Issue 9.1 June 2006 61
b. Clear each server entry.
c. Clear the checkbox for Enable DNS for WINS Resolution.
9. Click OK twice to accept the address information and close the Network dialog box.
10. Reboot the system if directed to do so.
Disabling or bypassing proxy servers in Web browser
If you are connecting a laptop directly to the Services Ethernet interface on the S8300 faceplate,
you must either disable or bypass proxy servers as described below.
Note:
Note: The Microsoft Internet Explorer (IE) browser is recommended. If you use IE, it
must be version 5.5 or higher. You can use Netscape, but some features of the
web interface may not work properly. If you use Netscape, it must be version 6.2
or higher.
To check or change proxy settings
1. Open your Internet browser.
2. Verify that you have a direct connection with no proxies, using one of the following options:
- For Internet Explorer:
a. Select Tools > Internet Options.
b. Click the Connections tab.
c. Click the LAN Settings button.
d. If Use a proxy server for your LAN is not selected, no change is necessary; click
Cancel to exit.
e. If Use a proxy server for your LAN is selected, you can:
- Deselect it and click OK to exit
or,
- Leave it selected and configure your browser to bypass the proxy server whenever
you are connected to the S8300 services port:
i. Click Advanced
ii. Type 192.11.13.6 in the Exceptions box. If there are other entries in this box, add
to the list of entries and separate entries with a “;”.
-iii. Click OK to exit.