Filter
Top Products
About the Installation Roadmap and Task Lists
Issue 9.1 June 2006 453
Checklist 4
Upgrade an existing G700 with an
S8300B to R3.0
Use Checklist 4 to upgrade a G700 Media Gateway with the following characteristics:
● The G700 has an S8300B Media Server configured as the primary controller.
or,
● The G700 has an S8300B Media Server configured as an LSP and is controlled by either
an S8300, S8400, S8500, or S8700-series Media Server
You will use Chapter 12 with this checklist. For help with connecting to and logging in to the
G700 or S8300, see About connection methods
on page 63.
Checklist 4: Task list to manually upgrade an existing G700 with an S8300B (R2.0.x
to R2.2.x)
Major Tasks Subtasks
Before going to the customer
site on page 667
- Get planning form
- Get the G700 serial number
- Check number of allocated ports
- Check FTP server for back up
- Get software/firmware files
- If using IA770, obtain service pack and
language files, if any
- Complete the RFA process
- Obtain static craft password
- Download service pack software to laptop, if
necessary
On-site Preparation for the
Upgrade on page 675
- Pre-Upgrade tasks — If the Target S8300 is the
Primary Controller
- Get IA770 data and stop IA770
- Back up recover system files
- Install new license and authentication files, if
necessary
- Save translations, if new license and/or
authentication files installed
- Transfer files from CD or laptop
Upgrade the S8300
on
page 694
Install the Upgrade Software:
- Upgrade S8300
- Make the upgrade permanent
- Install Communication Manager service pack, if
any
- Install IA770 service pack, if any
1 of 2