Filter
Top Products
Install the S8300
Issue 9.1 June 2006 495
To create the key file
1. On a directly connected laptop or other computer, create a flat-text file named keys.install,
with the correct keys information using any ASCII application (for example, Notepad).
2. Upload the keys.install file using the Upload Files to Server screen as described earlier.
3. When finished, click on the Configure Server wizard window to resume server
configuration.
The keys file can be loaded in one of the following two ways. If a keys.install file was previously
created on or downloaded to the services laptop or another computer on the network, it can be
installed now, as follows:
To upload the keys file
1. In the main menu under Miscellaneous, click the Upload Files to Server link.
2. Locate the keys.install file on your computer or network, then click Load File.
The file is uploaded to the media server's FTP directory.
3. When finished, click on the Configure Server wizard window to resume server
configuration.
Longer files may be transferred from the network time server to the S8300 Media Server as
follows:
To download or copy the keys file
1. Using either the Download Files to Server screen or the Transfer files using an FTP
procedure to access the keys file listed on your pre installation worksheet.
In both cases, the file is transferred to the media server's FTP directory.
2. When finished, click on the Configure Server wizard window to resume server
configuration.
3. After the keys.install file is uploaded, select the location where it resides, usually in the /var/
home/ftp subdirectory. (Services personnel may direct you to use the /tmp directory.)
4. If a keys file is not used, or if the correct keys.install file is already installed, select the option
not to install a new keys file.