Filter
Top Products
Emerson Process Management GmbH & Co. OHG5-24
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
04/2010
5.7 Checking the Settings
You may turn the alarm function On or Off
separately for each channel ("Alarm Monitor").
It´s also possible to use only some of the
thresholds. In this case, set the not used to a
level outside the range limits (for this, "Lo" and
"LoLo" support entering negative values).
In case of an alarm, you may like to enter
the STATES submenu, to check which one
is triggered.
The most important settings have now been
checked and the unit is congured to suite
your needs.
A backup copy of these conguration data
can now be saved.
Press
left until SETUP and then open SAVE-
LOAD.
5.7.6 Backup the Settings
This menu gives you the choice, to either
• make a local backup to a protected memory
area
• restore the factory default settings, or
• make a backup to an external USB de-
vice.
Ch1
Concentration Alarms
LoLo Alarm: Off
Lo Alarm On
Hi Alarm Off
HiHi Alarm Off
Concentration 75.000 ppm
Save-Load
Local Backup..
Factory Defaults..
USB Backup..
USB Firmware Update..