Filter
Top Products
Emerson Process Management GmbH & Co. OHG6-48
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
06/2010
Ch1
Linearization
Linearizer: Off
LinearMethod: Splines
Calculate!
Setpoints (X)..
Actuals (Y)..
Linearizer Min 20.000 ppm
Linearizer Max 110.000 ppm
Status
Normal
6.2.3.3.3 Setup Linearization
6.2.3 Setup Menu
Specify the linearization methode to be
used.
Available options: Splines, Polynom.
Switch On or Off the linearizer.
First enter SETPOINTS (X) to enter the new
setpoint values (
6-50 ).
When done, enter ACTUALS (Y) to enter the
corresponding actuals (
6-51 ).
Select this line to let the analyzer calculate
the new linearization curve.
The linearization status.
Possible values: Normal, Underow, Over-
ow, Undened
Setup..
Measurement..
Linearization..
If the system is set up accordingly, the access
code for level 3 must be entered to gain ac-
cess to this menu.