Filter
Top Products
Emerson Process Management GmbH & Co. OHG 6-41
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
06/2010
6
Software Menus
Start ...
Month: 1
Day: 1
Hour: 10
Minute: 0
Set!
Next 6/23/09 10:00
6.2.3 Setup Menu
'...' in the title is replaced by 'Zero All',
'Zero&Span All', 'Programmed Sequence'
or 'Blowback All', depending on the selected
procedure.
In lines 1 ... 4, specify date and time for the
next countdown to start.
Shows the time for the next start of procedure,
based on the current settings.
Set start date and time: The next calibration
time is calculated, considering the entries in
above lines and the interval time given on the
previous page.
Note!
This procedure also updates the 4 lines abo-
ve, to show the next calibration date as start
time.