Filter
Top Products
Emerson Process Management GmbH & Co. OHG2-2
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
04/2010
2.1 Common Technical Data
2.1 Common Technical Data
Gas parameters
Chapter 3 “Measuring principles”
Purging option
The purging medium (e.g. to minimize CO
2
interference or for enhanced safety when
measuring corrosive or poisonous gases)
must be dry, clean and free of corrosives
or components containing solvents.
To minimize cross interferences the purge
gas also has to be free of components to
be measured.
Its temperature must correspond to the
ambient temperature of the analyzer, but
be at least within the range 20 ... 35 °C
(68 ... 95 °F).
For information about values for pressure and
ow, please contact your nearest EMERSON
Process Management sales ofce.
Site of installation
Humidity
(non-condensing)
< 90 % RH at +20 °C (68 °F)
< 70 % RH at +40 °C (104 °F)
Degree of pollution 2
Installation category II
Elevation 0 to 2000 m (6560 ft) above sea level
Ambient atmosphere
Units may not be operated in corrosive,
ammable or explosive environments (ex-
cept ameproof XEFD) without additional
safety measures.
Certication
Electrical safety
CAN / USA
CSA-C/US, based on CAN/CSA-C22.2 No.
61010-1-04 / UL 61010-1, 2nd edition
Europe
CE, based on EN 61010-1
Electromagnetic
compatibility
Europe CE, based on EN 61326
Australia C-Tick
others NAMUR