Filter
Top Products
Emerson Process Management GmbH & Co. OHG 6-91
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
06/2010
6
Software Menus
6.2.3 Setup Menu
Setup..
Installed Options..
Pressure..
6.2.3.7.3 Setup Installed Options Pressure
Ch1
Pressure
Pressure Source: AIN1
Pressure 1013 hPa
SensorMin: 800 hPa
SensorMax
1100 hPa
Pressure Status Good
Reference: 1013 hPa
Manual Pressure: 1014 hPa
Compensation: Off
Select the pressure measurement data source
for the currently selected channel.
Available options:
XSP P1, XSP P2: internal sensors, connected
to the board XSP
AIN1, AIN2: analog inputs
Manual: enter the current pressure manually
Enable or disable pressure compensation for
the selected channel.
Available options: On, Off
Currently measured pressure, or currently
entered manual pressure value.
The sensor´s minimum and maximum limits,
or the limits for manual pressure entries.
The sensor´s status.
Possible entries: Good, Absent, Failure
Enter the reference pressure for pressure
compensaion here.
Manually enter the current ambient pressure
here.
Note!
If "Pressure source" is set to an option other
than Manual, this line is hidden.