Filter
Top Products
Emerson Process Management GmbH & Co. OHG 1-15
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
04/2010
1.5 X-STREAM XEGC: ½ 19 Inch Table-Top Unit
1.5 X-STREAM XEGC
This compact model for general purposes
can be tted with up to three photometer
measurement channels (IR or UV) and one
additional non-photometer channel (eO
2
, pO
2
or WLD). Power is supplied by a separate
external power supply unit.
By default the units are congured for tabletop
use. For rack mounting an accessory kit can
be ordered to either install 2 units alongside,
or one single unit together with a blind pla-
te.
Connection to power supply
DC 24 V power is supplied via a 3-pin socket
at the rear of the unit.
Interfaces
Electrical connections for interface signals are
provided via submin-D connectors, Ethernet
and USB connectors mounted on the rear
panel of the device
(g. 1-5).
For applications where screw-type terminals
are preferred, optional adapters are available,
which are mounted directly onto the submin-D
connectors.
Interface signals
Detailed technical details on the various in-
terfaces can be found at 1-10. The con-
guration of the connectors and the optional
screw-type terminal adapters are described in
chapter 4 'Installation' and the software
settings in chapter 6 'Software'.
Gas connections
Depending on the conguration of the unit
(number of measurement channels and serial
or parallel connection), sample and calibra-
tion gases are fed into the unit via up to 6
tube ttings mounted on the rear panel. The
conguration of the ttings is indicated on an
adhesive label located near the tube ttings.
Any free tube ttings can be used for purging
the device
to minimize interference from the am-
bient atmosphere,
or
when measuring corrosive
and/or ammable gases.
1
Technical Description