Filter
Top Products
Contents
Installation and Upgrades for G700 and S8300 11
December 2003
• Prepare to Install Firmware on the G700 191
Access the P330 Stack Processor 191
Verify the Contents of the tftpboot Directory 191
Determine Which Firmware to Install on the G700 191
• Install New Firmware on the G700 Media Gateway 194
Firmware Installation Procedures 194
Install New Firmware on the P330 Stack Processor 194
Install New Firmware on the G700 Media Gateway Processor 194
Install New Firmware on the Media Modules 196
• Administer Communication Manager 198
The Primary Controller is an S8300 198
Assign Node Names and IP Addresses for the LSPs 198
Administer Network Regions 199
Associate LSPs with Network Regions 200
Administer IP Interfaces 200
Administer the LSP Form 201
The Primary Controller is an S8500 or S8700 201
Assign Node Names and IP Addresses for the C-LANs and LSPs 202
Administer Network Regions 202
Assign LSPs to the Network Regions 204
Administer IP Interfaces 205
Administer the LSP Form 206
• Complete the Installation Process 209
5 Upgrading an Existing G700 with an S8300 —
R1.x to R2.0 211
System Access 211
• Task Summary 212
Before Going to the Site 212
On-site Preparation Tasks 212
S8300 Upgrade Tasks 212
G700 Upgrade Using the Wizards 213
G700 Manual Upgrade Tasks 213
G700 Pre-upgrade Tasks 213
G700 Upgrade Tasks 213
Post-Upgrade Tasks 213