Filter
Top Products
Contents
12 Installation and Upgrades for G700 and S8300
December 2003
• Before Going to the Customer Site 214
Get USB CD-ROM Drive 214
Collect Upgrade Information 214
If Upgrading from Release 1.1, Fill in the EPW 214
Get Planning Forms from the Project Manager 214
Get the Serial Number of the G700,
if Necessary 214
Check Number of Allocated Ports 215
Check FTP Server for Backing up Data 215
Get Software/Firmware Files 215
Download Software Update (patch) file
to Your Laptop, if Necessary 216
Complete the RFA Process
(Obtain license and password file) 217
License File and Communication Manager
Versions for a Local Survivable Processor 217
Complete and Download the License File to Your Laptop 217
Run the Automatic Registration Tool (ART)
for the INADS IP Address, if Necessary 218
Obtain the Static Craft Password 218
• On-site Preparation for the Upgrade 219
Access to the S8300 219
Access the S8300 via Telnet 219
Access the S8300 via the Maintenance Web interface 219
Access SAT 219
Check Current Software Release 220
Pre-Upgrade Tasks — If the S8300 is the Primary Controller 221
Clear Alarms 221
Check Link Status 221
Record All Busyouts 222
Disable Scheduled Maintenance 222
Check for Translation Corruption 222
Stop the LSPs (if applicable) 222
Disable Alarm Origination 223
Get IA770 (AUDIX) Data and Stop IA770
(if IA770 is being used) 224
Back up recovery system files 224
Back up data 224