Filter
Top Products
1
Roadmap and Reference
Installation Roadmap and Task Lists
44 Installation and Upgrades for G700 and S8300
December 2003
Checklist 5:
Upgrade an Existing G700 without
an S8300
Use the following checklist to upgrade a G700 Media Gateway with the following characteristics:
• The G700 does not have an S8300 and is controlled by an external S8300, S8500, or S8700 Media
Server.
You will use Chapter 7 with this checklist. For help with connecting to and logging in to the G700, see
Connection Methods
in this chapter.
Table 5: Task List to Upgrade an Existing G700 without an S8300
Major Tasks Subtasks
Before Going to the Customer Site
on
page 303
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Download firmware files
Installing Hardware for the G700 Media
Gateway and S8300 Media Server on
page 69
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
On-Site Preparation for the Upgrade
on
page 307
- Verify contents of the tftp directory
- Determine which firmware to install
Install New Firmware on the G700
Media Gateway on page 310
- Install firmware on the P330 stack processor
- Install firmware on the G700 media gateway processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or network, if any