Filter
Top Products
4
Installing a New G700 without an S8300
Prepare to Install Firmware on the G700
192 Installation and Upgrades for G700 and S8300
December 2003
Directory List for P300 Processor
2 Check the version number (ver num) of the EW_Archive file to see if it matches the Release
Letter. If not, you must upgrade the P330 stack processor.
3 Type show image version
The system displays the list of software.
Show Image Version List for P330 Processor
4 Check the version number of the stack software image file in Band B to see if it matches the your
planning document. If not, you must upgrade the P330 stack processor.
Determine if new firmware is required for the MGP, VoIP Module, and installed media
modules.
1 Type session mgp
2 At the MG-001-1(super)# prompt, type show mg list_config
The system displays the list of software.
Show MG List_Config
3 Refer to the list to check the FW vintage number of the G700. In the TYPE column, find G700,
then check the matching field in the FW VINTAGE column to see if it matches the vintage
number in your planning forms. If not, you must install new firmware on the G700 Media
M# file ver num file type file location file description
-- ---- ------- ---------- ------------- ----------------
1 module-config N/A Running Conf Ram Module Configuration
1 stack-config N/A Running Conf Ram Stack Configuration
1 EW_Archive 3.8.6 SW Web Image NV-Ram WEB Download
1 Booter_Image 3.2.5 SW BootImage NV-Ram Booter Image
Mod Module-Type Bank Version
------ ----------- ---- -------
3 Avaya G700 Media Gateway A 0.0.0
3 Avaya G700 Media Gateway B 3.9.0
eyp
SLOT TYPE CODE SUFFIX HW VINTAGE FW VINTAGE VOIP FW
---- ------ ----- ------ ---------- ---------- -------
V0 G700 DAF1 A 00 210(B) 2
V1 ICC S8300 A 72 00 N/A
V2 DCP MM712 A 2 52 N/A
V3 ANA MM711 A 2 12 N/A
V4 DS1 MM710 A 1 54 N/A