Filter
Top Products
3
Installing a New G700 with an S8300
Install New Software on the S8300
114 Installation and Upgrades for G700 and S8300
December 2003
Install New Software on the S8300
Although this is a new installation and a version of Communication Manager already exists on the S8300,
there may be new software loads available that you need to install. If necessary, follow the steps in this
section to install the most recent version of Communication Manager.
Verify the Time, Date, and Time Zone
1 Under Server click Server Date/Time.
Server Date/Time Window
2 Verify or set the media server’s time close enough to the NTS’s time, date, and time zone that
synchronization can occur (within about 5 minutes).
CAUTION:
For a new installation, be sure to set the time and time zone before installing the S8300
software. Failure to do so may cause network problems.
Install New Software
1 Launch the Maintenance Web Interface.
2 Choose Install New Software under Server Upgrades from the left pane of the main menu.
The S8300 displays the Install New Software screen.