Filter
Top Products
2
Installing Hardware for the G700 Media Gateway and S8300 Media Server
Installation and Cabling
90 Installation and Upgrades for G700 and S8300
December 2003
Figure 13: Cabling Multiple Units in a Single Rack
Connect Units within a Single Stack
1 Connect the light grey connector of the short Avaya X330SC cable (12 in, 30 cm) to the port
marked “to upper unit” in the bottom-most stack element.
2 Connect the dark grey connector of the same short X330SC cable to the port marked “to the lower
unit” in the unit above.
3 Repeat until you reach the top element in the stack. Up to ten G700s and/or other Cajun devices
can be stacked together.
To implement stack redundancy:
4 Use the Redundant Cable to connect the port marked “to lower unit” on the bottom element to the
port marked “to upper unit” on the top element of the stack.
If you have elements of a stack in two racks, you must use the Avaya X330LC cable to connect them. You
may not link more than 10 units to form a stack, but those units can be mounted in more than one rack.
cadc2cbl LAO 030203
1
2
1 Short Octaplane cable (X330SC)
2 Redundant cable (X330RC)