Filter
Top Products
3
Installing a New G700 with an S8300
Install New Software on the S8300
126 Installation and Upgrades for G700 and S8300
December 2003
Configure Ethernet Interfaces Screen
8 Use your planning forms to complete the fields for the:
—
IP Address assigned to the S8300 Media Server. Check your planning forms.
—
Gateway with the IP address of the default gateway of the subnet.
—
Subnet Mask with the value of the subnet mask of the hosting subnet.
—
Speed which should be set to Auto Sense.
CAUTION:
Do not guess on the addresses on this screen. If you enter the wrong addresses, service
will be disrupted across the customer’s network and may be difficult to correct.
9 Click Continue.
The Configure Local Survivable Processor screen appears.