5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Upgrade the S8300
234 Installation and Upgrades for G700 and S8300
December 2003
2 Select Install, make sure OK is highlighted, and press Enter.
3 Select <Yes> and press Enter.
NOTE:
After this step, the previous disk image cannot be recovered by rebooting.
4 Select the appropriate release version (if more than one) then select <OK> and press Enter.
At this point, the following processes are initiated:
• The S8300 hard drive is reformatted
• The new Linux operating system is installed