Filter
Top Products
1
Roadmap and Reference
Installation Roadmap and Task Lists
Installation and Upgrades for G700 and S8300 41
December 2003
Upgrade the S8300
on page 227 Install the Upgrade Software:
- Copy RP files to hard drive
- Install the RP software
- Set telnet parameters
- Install the upgrade software
- Verify software version
- Copy licence and authentication files to the S8300
- Configure S8300 network parameters
- If upgrading from a pre-1.2 release
- Restore Linux Migration backup files
- Disable messaging
- Verify date and time
- Install post-upgrade patch, if necessary
- Verify S8300 configuration
- Install license file
- Install authentication file, if necessary
- Save translations (if not using IA770)
- Verify operation
Upgrade the Firmware on the G700
on
page 250
- Decide whether to use the Installation Wizard
If not using the Wizard:
- Verify contents of the tftp directory
- Determine which firmware to install
- Install firmware on the P330 stack processor
- Install firmware on the G700 media gateway processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or network, if
any
- Install and restart IA770, if being used
- Install IA770 update (patch), if any
- Save translations (if using IA770)
Complete the Upgrade Process (S8300
is the Primary Controller) on page 260
- Check media modules
- Enable scheduled maintenance
- Busyout trunks
- Check for translation corruption
- Resolve alarms
- Re-enable alarm origination
- Back up system
- Restart LSPs, if any
Table 3: Task List to Upgrade an Existing G700 with an S8300 (R1.x to R2.0) Continued
Major Tasks Subtasks
2 of 2