Filter
Top Products
3
Installing a New G700 with an S8300
Administer Communication Manager
Installation and Upgrades for G700 and S8300 163
December 2003
Enable Announcements, If Necessary
1 Only if specifically requested by the customer or your planning documents, at the SAT prompt,
type
enable announcement-board <gateway_number> V9, where <gateway_number> is the
number of the G700 Media Gateway you just added and
V9 is the virtual slot (for example, 2V9
means Media Gateway number 2, slot V9.
2 Press ENTER to enable announcements.
The system displays the message Command successfully completed.
Save Communication Manager Translations
Save translations again after all Communication Manager administration is complete.
— At the SAT prompt, type
save translation.