Filter
Top Products
3
Installing a New G700 with an S8300
Administer Communication Manager
Installation and Upgrades for G700 and S8300 159
December 2003
2 Enter the names of up to six LSPs to be assigned to region 1. The LSP names must be the same as
administered on the Node Names form.
3 Submit the form.
4 Repeat for each network region to which you want to assign LSPs.
Administer IP Interfaces
Define the IP interfaces of the S8500 or S8700 port network CLAN boards
NOTE:
This should have already been established as a part of normal S8500 or S8700 installation.
1 Type change ip-interfaces to open the IP Interfaces screen.
IP Interfaces Screen
2 Complete the fields as described the in the following table.
change ip-interfaces procr Page 1 of 1
IP INTERFACES
Type: C-LAN
Slot: 01A03
Code/Suffix: TN799 d
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Gateway Address: 135.9.41.254
Enable Ehternet Port? y
Nework Region: 1
VLAN: 0
Number of CLAN Sockets Before Warning: 400
Field Conditions/Comments
Type Either C-LAN.
Slot The slot location for the circuit pack.
Code/Suffix Display only. This field is automatically populated with TN799 for C-
LAN.
Node name The unique node name for the IP interface. The node name here must
already be administered on the Node Names screen.
IP Address The IP address (on the customer LAN) of the C-LAN.
Subnet Mask The subnet mask associated with the IP address for this IP interface.
For more information on IP addresses and subnetting, see
“Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504”.
Gateway Address The address of a network node that serves as the default gateway for
the IP interface.
1 of 2