Filter
Top Products
Contents
14 Installation and Upgrades for G700 and S8300
December 2003
Install New Firmware on the G700 Media Gateway Processor 253
Install New Firmware on the Media Modules 254
Install New Firmware on Other G700 Media Gateways 256
• If the S8300 is Using IA770 257
Install and Restart IA770 257
Save Translations 259
Install IA770 update (patch) files, if any 259
• Complete the Upgrade Process
(S8300 is the Primary Controller) 260
Check Media Modules 260
Enable Scheduled Maintenance 260
Busy Out Trunks 260
Check for Translation Corruption 260
Resolve Alarms 260
Re-enable Alarm Origination 261
Back up the System 261
Restart LSPs (if any) 261
6 Upgrading an Existing G700 with an S8300 —
R2.0 to R2.x 263
System Access 263
• Task Summary 264
Before Going to the Site 264
On-Site Preparation Tasks 264
If the S8300 is a Primary Controller 264
S8300 is Either a Primary Controller or LSP 264
S8300 Upgrade Tasks 264
G700 Upgrade Using the Wizards 264
G700 Manual Upgrade Tasks 265
G700 Pre-Upgrade Tasks 265
G700 Upgrade Tasks 265
Post-upgrade Tasks 265
• Before Going to the Customer Site 266
Collect Upgrade Information 266
Get Planning Forms from the Project Manager 266
Get the Serial Number of the G700,
if Necessary 266
Check Number of Allocated Ports 266