Filter
Top Products
1
Roadmap and Reference
Connection and Login Methods
Installation and Upgrades for G700 and S8300 49
December 2003
3 Locate the TCP/IP properties as follows:
— Windows 95, 98, and ME: On the
Configuration tab, scroll through the installed network
components list to the TCP/IP part of the devices list. Select the TCP/IP device that
corresponds to your Ethernet card.
— Windows NT: On the Protocols tab, select
TCP/IP in the installed network components list.
4 Select the Properties button.
5 In the TCP/IP Properties box, click the IP Address tab.
6 Click the radio button to Specify an IP address, and enter the following:
— IP address: 1
92.11.13.5
— Subnet mask: 255.255.255.252
NOTE:
Record any IP addresses, DNS settings, or WINS entries that you change. You may need
to restore them later to connect to another network.
7 Disable DNS service as follows:
— Windows 95, 98, and Me: Click the
DNS Configuration tab. Verify that the Disable DNS
radio button is selected.
— Windows NT: Click the
DNS tab.
• If any IP addresses appear under DNS Service Search Order, make a note of them
in case you need to restore them later.
• Select each IP address in turn and click the Remove button.
8 Disable WINS Resolution as follows:
— Windows 95, 98, and Me: Click the
WINS Configuration tab. Verify that the Disable
WINS Resolution
radio button is selected.
— Windows NT: Click the
WINS Address tab.
• If any IP addresses appear for the Primary and Secondary WINS servers, make a
note of them in case you need to restore them later.
• Clear each server entry.
• Clear the checkbox for Enable DNS for WINS Resolution.
9 Click OK twice to accept the address information and close the Network dialog box.
10 Reboot the system if directed to do so.