Avaya S8300 Home Theater Server User Manual


 
8
Connecting Telephones and Adjunct Systems
ASAI Co-Resident DEFINITY LAN Gateway (DLG)
336 Installation and Upgrades for G700 and S8300
December 2003
Administration Task Summary (for the S8300
Media Server)
On the SAT interface of the S8300 Media Server with G700 Media Gateway, follow these steps:
1 Type display system-parameters customer-options. Go to page 4 and make sure that Processor
Ethernet is enabled.
2 Type display ip-interfaces, and make sure the PROCR is administered and its Ethernet port is
enabled. If the PROCR is not listed (PROCR should appear in the Type option field), add the
PROCR.
To administer CTI links:
1 Use the display system-parameters customer-options command and make sure the following
option is set to yes:
Co-Res DEFINITY LAN GATEWAY (y)
2 Use the add cti-link command to administer a CTI link.
3 Use the change ip-services command and specify a Service Type of DLG.
When Service Type DLG is entered, the system adds a DLG Administration page as the last of the
form.
4 Complete the DLG Administration page to add your client information.
NOTE:
A CTI link must be administered before a link number can be entered. For more
information and detailed procedures, refer to CallVisor
®
ASAI Technical Reference, 555-
230-220.
Supported Ethernet Interfaces
Table 13, Ethernet Interfaces, on page 336 summarizes Ethernet interfaces used by several current
switching platforms:
Table 13: Ethernet Interfaces
Platform
Processor
Ethernet
Interface?
C-LAN
(TN799)
Ethernet
Interface
DEFINITY Servers csi, si,
and r
No Yes
Avaya S8100 Media
Server (formerly
DEFINITY ONE/IP600)
Yes Yes
Avaya S8300 Media
Server with Avaya G700
Media Gateway
Yes No