Filter
Top Products
3
Installing a New G700 with an S8300
Install New Software on the S8300
134 Installation and Upgrades for G700 and S8300
December 2003
25 To check, or possibly change, something you entered on a previous screen, use your browser’s
Back button to page back through the Configure Server screens.
26 Check or change the items in question.
27 Click the Continue button to move forward again, whether you change anything or not. If you
don’t do this, information in the wizard may not be processed correctly.
NOTE:
For any configuration, it is always safe to Cancel the configuration, and run the Configure
Server wizard again later from the beginning. You might use this option if you are
checking or modifying settings on a server that has already been configured, and there is
not a large amount of new information to enter.
28 On the Update System screen, if you are satisfied that everything is set correctly, click Continue.
You can watch the progress of the configuration at the
Updating System Files screen. If the
configuration status displays stops updating at some point and the screen appears to freeze, you
may have lost contact with the server. In this case, the configuration process will continue and you
can log back on and pick up where left off.
Updating System Files Screen
When the process is complete, you will receive a notification. Click Close Window and continue the
configuration of the G700 Media Gateway on the command line interface.