Filter
Top Products
5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Upgrade the S8300
244 Installation and Upgrades for G700 and S8300
December 2003
Server Date/Time Window
2 Verify or set the media server’s time close enough to the NTS’s time, date, and time zone that
synchronization can occur (within about 5 minutes).
Install Post-Upgrade Communication Manager
Update File from Your Laptop, if any
NOTE:
Skip this procedure if there is no Communication Manager update file to install.
CAUTION:
The software update may or may not be call-preserving.
Use a telnet session to install the software update.
1 Click Start > Run to open the Run dialog box.
2 Type telnet 192.11.13.6 and press Enter.
3 Log in with the initial craft ID and password. (You cannot use dadmin at this point.)
4 Type cd /var/home/ftp/pub and press Enter to access the pub directory.
5 At the prompt, type ls -ltr and press Enter to list files in the pub directory.
The media server displays a list of files in the FTP directory. Verify that the directory contains the
Communication Manager .tar.gz file you have uploaded, if any.
6 Type sudo update_unpack <update>.tar.gz, where <update> is the release or issue number of
the latest update file. (For example,
03.0.219.0-4925.tar.gz). Press Enter.
7 Type update_show and press Enter to list Communication Manager files to verify the new
software file was installed.