Filter
Top Products
4
Installing a New G700 without an S8300
Administer Communication Manager
200 Installation and Upgrades for G700 and S8300
December 2003
3 Press F3 (ENTER) to submit the screen.
Associate LSPs with Network Regions
If the primary controller has LSPs, you can associate each LSP with one or more network regions. In the
event of a network failure, IP telephones assigned to a network region will register with an LSP
associated with that region.
This procedure associates up to six LSPs with a network region.
Associate LSPs with a network region
1 On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 3
2 Enter the names of up to six LSPs to be associated with region 1. The LSP names must be the
same as administered on the Node Names form.
3 Submit the form.
4 Repeat for each network region with which you want to associate LSPs.
Administer IP Interfaces
This procedure assigns network region 1, as an example, to the S8300 Media Server.
Assign the network region to the S8300
1 At the SAT prompt, type change ip-interfaces procr.
The S8300 displays the IP Interfaces screen for the media server.
IP Interfaces Screen
change ip-network-region 1 Page 2 of 19
IP NETWORK REGION
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP_____
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
change ip-interfaces procr Page 1 of 1
IP INTERFACES
Type: PROCR
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Enable Ehternet Port?
Nework Region: 1