Filter
Top Products
2
Installing Hardware for the G700 Media Gateway and S8300 Media Server
Installation and Cabling
86 Installation and Upgrades for G700 and S8300
December 2003
3 Slide the module slowly into the chassis, maintaining an even pressure to assure that the module
does not become twisted or disengaged from the guides.
Figure 11: Insert Media Module
4 Apply firm pressure to engage the connectors.
The media module connector has different length pins. The long pins will engage first to provide
grounding. Medium length and short pins will provide power and signal.
5 Lock the media module into the chassis by tightening the spring-loaded captive screws on the
front of the module.
!
WARNING:
To prevent access to electrical hazards by unauthorized personnel and to ensure
continued compliance to international radiated emissions requirements, all captive
screws must be securely tightened such that they cannot be loosened without the use
of a tool.
!
WARNING:
After you have connected telephones to the various media modules, be sure to add
circuit protection to the lines (see Complete the Telephone Installation Process
on
page 331).
At this point, you have readied the G700 inserted the S8300 if required, and inserted the media modules,
as described in the planning documentation. Next, if required, the Expansion Module should be inserted
into its bay.