Filter
Top Products
6
Upgrading an Existing G700 with an S8300 — R2.0 to R2.x
Upgrade the S8300
290 Installation and Upgrades for G700 and S8300
December 2003
Install Post-Upgrade Communication Manager
Update File from Your Laptop, if any
NOTE:
Skip this procedure if there is no Communication Manager update file to install.
CAUTION:
The software update may or may not be call-preserving.
Use a telnet session to install the software update.
1 Click Start > Run to open the Run dialog box.
2 Type telnet 192.11.13.6 and press Enter.
3 Log in with the initial craft ID and password. (You cannot use dadmin at this point.)
4 Type cd /var/home/ftp/pub and press Enter to access the pub directory.
5 At the prompt, type ls -ltr and press Enter to list files in the pub directory.
The media server displays a list of files in the FTP directory. Verify that the directory contains the
Communication Manager .tar.gz file you have uploaded, if any.
6 Type sudo update_unpack <update>.tar.gz, where <update> is the release or issue number of
the latest update file. (For example,
03.0.219.0-4925.tar.gz). Press Enter.
7 Type update_show and press Enter to list Communication Manager files to verify the new
software file was installed.
8 Type sudo update_activate <update>, where <update> is the release or issue number of the
latest software file. (For example,
03.0.219.0-4925. Do not use the .tar.gz extension at the end of
the file name). Press
Enter.
The system may initiate a software reset system 4. You must wait until the restart/reset has
completed before entering additional commands.
If the system displays the message —
/opt/ecs/sbin/drestart 1 4 command failed — ignore this
message
.
9 Type update_show again and press Enter to list Communication Manager files to verify the new
software file was applied.
Install IA770 update (patch) files, if any
If IA770 is being used, a post-upgrade update (patch) for IA770 may be required. See the IA770
documentation for procedures to install an update. The documentation can be found on the Avaya
Support Web Site at http://support.avaya.com. Then click on Product Documentation and then
Messaging and scroll down to the INTUITY document links.