Filter
Top Products
5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Before Going to the Customer Site
218 Installation and Upgrades for G700 and S8300
December 2003
Run the Automatic Registration Tool (ART)
for the INADS IP Address, if Necessary
This step is normally not necessary for an upgrade of an existing system.
NOTE:
ART is available only to Avaya associates. Business Partners call 800-295-0099.
The ART tool is a software tool that generates an IP address for a customer’s INADS alarming modem.
This IP address is required for configuring the S8300’s modem for alarming.
NOTE:
You must generate a license and authentication file before you use the ART tool. Also, the
ART process is available only to Avaya personnel. You need an ART login ID and
password, which you can set up at the ART web site. Non-Avaya personnel must contact
their service support or customer care center for INADS addresses, if required.
1 Access the ART web site on your laptop at http://art.dr.avaya.com.
2 Select Administer S8x00 Server products for installation script, log in, enter the customer
information, select Installation Script, and click Start Installation script & IP Addr Admin.
A script file is created and downloaded or emailed to you.
3 You can use the installation script to automatically set up an IP address and other alarming
parameters.
Obtain the Static Craft Password
After installing new software and new Authentication file, you will need to use a static craft password to
access the customer’s system. This static password will enable you to log in to the S8300 with a direct
connection to the Services port without the ASG challenge/response. To obtain the static password, call
the ASG Conversant number, 800-248-1234 or 720-444-5557 (or 877-295-0099 for Avaya Business
Partners), and follow the prompts to get the password. In addition to your credentials, you will need to
enter the customer’s Product ID or the FL or IL number.