Filter
Top Products
5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Upgrade the S8300
Installation and Upgrades for G700 and S8300 233
December 2003
Set Telnet Parameters
The Microsoft Telnet application may be set to send a carriage return (CR) and line feed (LF) each time
you press
Enter. The installation program sees this as 2 key presses. You need to correct this before you
Telnet to the server.
1 Click Start > Run to open the Run dialog box.
2 Type telnet and press Enter to open a Microsoft Telnet session.
3 Type unset crlf and press Enter.
4 Type display and press Enter to confirm that "Sending only CR" is set.
5 Close the window by clicking on the X in the upper-right corner.
This resets your Microsoft Telnet defaults and does not need to be done each time you use Telnet.
Remaster Hard Drive and Install the Upgrade
Software
NOTE:
This procedure accesses the information on the CD from the USB CD-ROM drive.
1 Type telnet 192.11.13.6 and press Enter to view the first screen.
Tip:
To navigate on these screens, use the arrow keys to move to an option, then press the space
bar to select the option. Press Enter to submit the screen.