Filter
Top Products
1
Roadmap and Reference
Wizards for Installations and Upgrades
Installation and Upgrades for G700 and S8300 31
December 2003
• Any tasks related to adding LSPs to the primary controller you are installing, as documented in
Administer Communication Manager
on page 151:
• Any tasks related to administration of the primary controller in Administer Communication
Manager on page 151
• Set Up SNMP Alarming on the G700 on page 166, if required
Electronic Worksheets and Templates
To enable the IW to automatically configure and install the system, get the following Excel spreadsheet
files from the project manager and load them onto your laptop:
• Electronic Pre-installation Worksheet
• Names/Number List Template (for S8300/G700 only)
• Customization Template
NOTE:
Information on how to use these files is contained within the files themselves.
Electronic Pre-installation Worksheet
For greatest efficiency, obtain the Electronic Pre-Installation Worksheet (EPW), which is filled in by the
customer and Avaya project manager. This worksheet is an Excel spreadsheet from which IW
automatically pulls data to configure and install the S8300/S8500/S8700 Media Servers, G350/G700
Media Gateways, P330 Stack Processor, and VoiP Engines. The EPW also can be used to supply basic
translations for the S8300/G700 configuration.
The default values used by the wizard can be viewed at http://support.avaya.com/avayaiw under the
"View Default Parameters" link. If the wizard defaults do not meet the customer’s needs, you can use a
custom template.
Once the EPW has been imported, all the values from the EPW appear as defaults in the wizard.
Names/Number List Template (for S8300/G700 only)
The Names/Number Template, like the EPW, is an Excel spreadsheet that contains user administration
data. The IW pulls this data to automatically administer users on the new system. This administration
includes users’ names, extensions, telephone types, classes of service, languages, locations, and voice
mail capability. The native display name (unicode) is included.
As each user's name and accompanying data is imported, the wizard will administer the station using the
provided information along with default values for other station fields. After the import has completed,
each station will be ready to be plugged into the wall jack and activated. Analog and digital phones will
be ready for a TTI registration sequence. IP phones will be ready for an IP registration sequence.
Customization Template
The Customization Template is a third Excel spreadsheet that allows automatic administration of key
custom Communication Manager translations. These are:
• Classes of Service
• Feature Access Codes
• Trunk Access Codes