Filter
Top Products
Programming Function Blocks and Features
Video Recorder – User Manual 101
4.9 Program Analog Outputs
The analog outputs will be accessible if an analog output board is detected upon power up.
If the instrument will be used for control, program the loops first. See Program Control Loops in Section
4.8.
Select an analog output to program.
Analog output type
Select the output type from Table 4-11.
Table 4-11 Analog Output Types
Type as displayed Full name of output type
CAT Current Adjusting Type (Current output)
DAT Duration Adjusting Type (Time proportioning output)
Table 4-12 shows the prompts for each type of Analog Output.
Table 4-12 Prompts For Analog Output Types
CAT DAT
IN DECIMAL POS IN DECIMAL POS
OUT DECIMAL POS INPUT SOURCE
INPUT SOURCE INC SLEW LIMIT
IN LOW LIMIT DEC SLEW LIMIT
IN HIGH LIMIT IMPULSE TIME
OUT LOW LIMIT MIN ON TIME
OUT HIGH LIMIT MIN OFF TIME
INC SLEW LIMIT FAILSAFE
DEC SLEW LIMIT FAILSAFE VALUE
FAILSAFE OUTPUT RELAY
FAILSAFE VALUE
Table 4-13 describes each prompt.